When it comes to hobbies, few are as rewarding as woodworking. You can turn yourself a beautiful railing, create a jewelry box for your daughter or create a new dining room table which perfectly matches your renovated flooring. Regardless of the project you want to tackle, the tips below will help you find success.
Reusable sanding blocks save you time and money. To make them all you need is a few pieces of scrap lumber. Cut a piece of 2×4 into a rectangle approximately 2 inches wide and 4 inches long. Cut a piece of sandpaper the size of your block. Then, spray one side of the piece of lumber with spray adhesive and adhere the sandpaper to the block of wood.
The reason why many power tools have guards on them is to keep you safe. Never remove the guards off of any of your tools. You may not understand why they are there, but they are there for a reason. They are there to protect you from sharp blades, moving parts and other things that could potentially hurt you.
Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.
When sanding a piece of lumber, beginning with a coarse sandpaper. Remove the excess dust from the lumber. Then, once the largest scratches are removed, sand again with a smoother sandpaper. Follow this sanding with a tack cloth. Continue using smoother sandpaper until the lumber feels smooth when you run your hand across it.
One of the necessary tools for woodworking is the common pencil. Pencils do get lost easily, however. Buy plenty, then store them in an old instant soup container. Fill the container with sawdust and drill holes in the lid. You’ll now have plenty of pencils and the container won’t tip over easily.
Unless you are charging it, never leave your tools plugged in and unattended. You never know who might approach your tool, accidentally setting it off. Not only can this damage the items around it, but the person could be hurt and you could be left liable for the end result.
Each shop needs a stair gauge. They are used often to layout jacks for stairs, but they can also be clamped to your carpenter’s square. This will make them into guides for a circular saw. Using the square, you will have perfectly straight cuts every time.
If you are cutting, sanding, or finishing something small, get out your hot glue gun. Affix the item you are working on to the end of a pedestal stick. Hot glue holds better than a clamp, and small objects are impossible to clamp anyway. Just be careful when pulling the piece off to avoid tearing the back side of the wood.
Do you hate those bubbles that form when applying joint compound to your drywall? There is a simple trick that professional drywallers use to avoid this annoying problem. Add two or three drops of dish detergent to your joint compound and you will be rewarded with bubble free joint compound.
There are many tools used for woodworking, but you may not want the expense involved with acquiring them. Look at your project and see if there might be a more reasonable solution to this cost. You may find that a cheaper tool can give you the same result as some of the expensive ones.
When deciding on a woodworking project, make sure you know what tools will be required to finish the project. If you are missing a tool, you may have to stop in the middle of the project and never finish. Many tools are available for rent at home improvement stores, but some you may have to purchase. This purchase could bring you well above your budget.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
Fumes from oil-based stains can be harmful to animals, as well as humans. To avoid fumes, try using a water-based stain. Water-based stain comes in a wide variety of colors, even more than their oil-based counterparts. And the application process is the same whether you are using oil, or water-based stain.
Join a woodworking forum to get tips and suggestions on your work. You may know a lot about woodworking, but joining a group of people who are working on similar projects will motivate you. Not only that, but others can answer any questions you have. You can also answer questions for others.
Get a tool actuated shop vac to do double duty in your woodworking shop. This handy innovation can help you keep your woodworking area clean and tidy as you work. With your sander or saw connected to you tool actuated shop vac, you will have continuous cleanup of dust and shavings as you work. This makes woodworking safer and more pleasant and cleanup quicker and easier.
When opting for a pencil, try using a mechanical pencil instead of other varieties. Mechanical pencils allow you to make more precise lines on your wood. This means more precise cutting and less mistakes down the road. Even choose mechanical pencils over pencils that are labeled carpenter’s pencils. They are still more precise.
Be certain that your woodworking power tools are in tip top shape before you begin working. Your saw blades and drill bits should be perfectly sharp and installed properly. If you try to use a saw blade or drill bit that is dull or slightly askew, you are sure to run into problems that could be quite dangerous. Additionally, using less than optimal equipment can only detract from the efficiency and accuracy of your work.
From a tiny match box to a new deck for your backyard, working with wood provides you with tangible rewards which show how skilled you are. In order to better those skills, use the ideas mentioned here and start working smarter. In no time, you’ll find that you are able to achieve even greater results.